SCL HP100 Honing Powder is a unique blend of abrasive powder that will help smoothing out on lightly worn marble and terrazzo floors, marble surface with etch mark and glass ring mark prior to use marble polishing powder.
Recommended for periodic maintenance to give a good preparation for use on lightly worn marble surface prior to using SCL-Marble Polishing Powder.
Does not contain any wax compound.
When regularly used, it does not have wax build-up residue.
Place one table spoon of SCL HP100 Honing Powder onto the floor. Place the floor polishing machine on top of the powder before begin working with the machine.
A “3M” Red polishing pad is recommended.
Add only enough water so that the circular pattern left by the slurry is visible.
Use a squeezee to pull the slurry to one side and check the light scratches on the marble are removed. Severe scratches have to be removed with diamond polishing pads.
When the scratches, etched marks or ring marks are removed, proceed to polish the marble floor with SCL-Marble Polishing Powder to bring back the luster.
Do not share the same polishing pad when using HP100 Honing Powder & Marble Polishing Powder.
Rinse the entire floor with SCL Stoneclean or SCL Neutral Clean.
Note: Do not be alarmed to see the marble surface lose its shine when using SCL-HP100
Approximate Coverage: 1-kg covers approx. 40m2 to 50m2
Available packing size: 1-kg / 4-kg / 20-kg
Color available: Black & White
This product is intended for professional use only.
Recommended weight of the floor polishing machine is between 55 to 65kg and running at 175rpm.
A very worn dull marble/granite surface needs the professional’s diamond polishing system.
Purchasers are required to test the suitability of the product for their intended use. A Light Construction Ltd makes no warranty, expressed or implied on the products and the effects. A Light Construction Ltd shall not responsible for any risks or liabilities, direct, indirect or consequential arising out of the used or the inability to use the product.