SCL ADHESIVE & SEALER REMOVER

SCL ADHESIVE & SEALER REMOVER

Application on the type of stones:

TECHNICAL BULLETIN
Descriptions/Features
SCL ADHESIVE & SEALER REMOVER is designed to remove sealer & wax coatings, candle waxes, adhesive tape marks and marker-ink stain.

Application on the type of stone: On all types of natural stone and man-made tile.

Direction to use: Send request to A Light Construction for application procedure. Application procedure shall depend on severity of stain, age of stain and different texture of stone/tile surface.

Available packing size: 1-litre / 3.8-litres / 20-litres
Available export packing size: 1-litre / 3.8-litres / 20-litres

Important Note:
Remember to rinse with SCL Stoneclean-Xtra(pH9.6) after using SCL Adhesive & Sealer Remover to achieve best result.

Precautions:

  • Wear gloves when handling the product.
  • Always test on a small area first.
  • This product is intended for professional use. Otherwise, the user should be guided by A Light Construction Specialists or its authorized representatives.

Cautions:

  • During the scrubbing process, avoid stepping on the chemical as XY Stripper is able to dissolve footwear.
  • DO NOT use a wet/dry vacuum to pick up SCL XY Stripper alone.
  • It may start the spark and ignition.
  • Dot Hazard Class: Flammable Liquid
  • Incompatible materials: Strong oxidizing agents.

Purchasers are required to test the suitability of the product for their intended use. A Light Construction Ltd makes no warranty, expressed or implied on the products and the effects. A Light Construction Ltd shall not responsible for any risks or liabilities, direct, indirect or consequential arising out of the used or the inability to use the product.

Remove:

    • adhesive stain

    • ink stain

              rubber hammer mark

    • candle wax

    • pencil mark

    • sealer coat

             tape mark

 

Gallery:

Translate »