SCL-OE2 is designed to mix with SCL-PPP Poultice Powder to remove penetrated cooking oil, engine oil, candle wax, etc…
Polished & rough texture surface marble, limestone, granite, slate, terra-cotta, homogeneous tiles and all types of natural stone.
Available packing size for OE2 chemical: 1-litre / 3.8-litres / 20-litres
Export packing size for OE2 chemical: 1-litre / 3.8-litres / 20-litres
Available packing size for PPP Poultice Powder: 1kg / 5kg / 10kg
5kg and 10kg are pack in carton box.
Approximate coverage for 1.0sq.ft.
350ml of SCL-OE2 chemical required 150grams of SCL-PPP Poultice Powder.
Step 1. Prepare the poultice.
Mix SCL-PPP Powder with SCL-OE2 chemical into a thick paste about the consistency of creamy peanut butter.
Step 2. Apply the poultice.
Carefully apply the poultice(i.e. the paste) to the stained area. Not too thin, generally about 1/4 inch thick is sufficient for most stains.
Step 3. Cover the poultice.
Cover the poultice with a clear thin transparent plastic sheet or a plastic food wrap. Tape the poultice with a low adhesive paper masking tape.
Step 4. Remove the poultice.
After the poultice is thoroughly dry and harden approximate 1-2 days, sweep it off or scrape it off with a spatula. Dispose them in a plastic bag. Remove the paste only if the paste is thoroughly dry. Do not remove the paste unnecessarily for viewing. If the stain has lightened, you possibly required a second attempt.
Purchasers are required to test the suitability of the product for their intended use. A Light Construction Ltd makes no warranty, expressed or implied on the products and the effects. A Light Construction Ltd shall not responsible for any risks or liabilities, direct, indirect or consequential arising out of the used or the inability to use the product
penetrated candle wax stain
penetrated cooking oil
penetrated engine oil
penetrated plasticine stain