Designed to repel water-based fluids, retards algae growths and retards limes putty effectively.
SCL STAIN-B Penetrating Sealer comprises a single-component blend with an aliphatic solvent designed to repel water and efflorescence effectively. An ideal sealer to apply to the bottom of the marble and granite stone before installation to prevent water mark occurring to the top side of the stone.
Ride the resins to penetrate faster and deeper than most of the water-based sealer.
Resins coat the individual microscopic pores’ structure and reduce the pore size thereby retains the vapour transmission of the stones.
Give a hydrophobic treatment.
Retard “lime putty” and “algae growths”.
Application on the type of stone:
Suitable to apply on most type of natural stones such as marble, granite, sandstone, pebble stone, slate, etc.
Ideal to apply on the back/bottom sides of the stones.
Direction to use:
After washing, allow the stone to dry for at least 12 hours before applying STAIN B penetrating sealer. Used a roller to apply.
Allow 30 minutes in between coats. Wipe/Buff off the excess resins with a dry clean cloth after the last coat. Avoid contact with water for 48 hours. Allow the sealer to cure and harden for 48 hours in the interior of the stone before tiling.
If you wish to apply STAIN B sealer on a polished marble/granite (i.e. Top surface), remember to test a small area first to confirm the sealer did not cause uneven darkening tone to the stone surface. When apply STAIN B sealer to the top surface of a stone, you have to remember to wipe/buff off the excess sealer after 3 to 5 minutes of application. Do not allow the sealer to dry on the surface without wiping.
Generally, one coat is sufficient for polished surface stone and two (2) or more coat of penetrating sealer shall depend on the porosity of the stone.
Available packing size: 1-litre / 3.8-litres / 20-litres
Export packing size: 1-litre / 3.8-litres / 20-litres
Test a small area first.
Do not apply on polished surface limestone.
Do not apply on rough texture top surface granite before testing on a small area to confirm changes of the stone texture. Some stones turn out to be very dark colour.
Avoid using High pressure-jet washing method to clean the stone as high pressure-jet will reduce the sealer’s performance and effectiveness of the penetrating sealer.
Applying SCL Stain-B penetrating sealer on a marble surface does not make the marble surface become acid resistance.
Keep away from heat, sparks and open flames
Keep out of Reach of Children
Pregnant woman should avoid using this product.
Purchasers are required to test the suitability of the product for their intended use. A Light Construction Ltd makes no warranty, expressed or implied on the products and the effects. A Light Construction Ltd shall not responsible for any risks or liabilities, direct, indirect or consequential arising out of the used or the inability to use the product.