SCL Sealer Coat

SCL SEALER COAT is formulated to form a thin film to treat on area that required to prevent water emerging from underside of the stone as well as to treat porous top surface that required to prevent engine oil from entering.

Application on the type of stones:

Apply 2 & more coats of SCL Sealer Coat at driveway could prevent engine oil up to 48 hours.
Give a hydrophobic and oil-phobic treatment.

Application on the type of stone:

Suitable to use on all types of rough texture stone surface and tiles and other porous materials such like concretes, terra-cotta tiles and pebble stones.
Not suitable to apply on polished surface stone.

Direction to use:

Clean the top surface of the stone with either SCL Neutral Clean (pH7.0) or SCL Stoneclean to remove all dust, dirt and soils prior to application.
Allow the stone to dry for at least 12 hours before applying SCL Sealer Coat.
Allow 5 to 10 minutes in between coat.
A rough texture stone needs 3 coats to give maximum protection against engine oil when used at driveway.

Available packing size: 1-litre / 3.8-litres / 20-litres
Available export packing size: 1-litre / 3.8-litres / 20-litres


Test a small area first.
Do not apply on polished surface stone and other polished materials.
Avoid using High pressure-jet washing method to clean the stone as high pressure-jet will reduce the sealer’s performance and effectiveness of the sealer.


Keep away from heat, sparks and open flames
Keep out of Reach of Children
Pregnant woman should avoid using this product.

Purchasers are required to test the suitability of the product for their intended use. A Light Construction Ltd makes no warranty, expressed or implied on the products and the effects. A Light Construction Ltd shall not responsible for any risks or liabilities, direct, indirect or consequential arising out of the used or the inability to use the product.


Translate »