SCL STONE PROTECTOR is a water based protector that protects against alkaline spillage that could cause etched mark on marble’s vanity top. It is easy to use. There is no hassle to operate with a hand held polishing machine.

Application on the type of stones:

Use once daily or at least once a week apply SCL Stone Protector on marble vanity top will prevent marble surface from etching caused by alkaline products such as hand soap, water droplet stain, etc.
Frequently use SCL Stone Protector can also increase the level of shine.
Repair mild etched mark with SCL Polishing Milk Shake or SCL Marble Polishing Powder prior to use Stone Protector. Severe lost of shine required the Professional.

Direction to use:

Shake the bottle well before use.
Wet the dry paper towel with the protector.
Lightly rub the protector on the marble vanity top.
Leave the protector to 80%dry (about 3 to 5 minutes).
Now, use another piece of dry paper towel rub the protector in a circular motion until the
surface is dry and clean.

Available packing size: 500ml & 1-litre

Caution: Do not use SCL Stone Protector on bathroom’s marble floor. It causes slipperiness.

First Aids:
If contacted with eyes and skin, flush with water for 15 minutes. Call a physician.

Dot Hazard Class: Non-hazardous

Purchasers are required to test the suitability of the product for their intended use. A Light Construction Ltd makes no warranty, expressed or implied on the products and the effects. A Light Construction Ltd shall not responsible for any risks or liabilities, direct, indirect or consequential arising out of the used or the inability to use the product.


Translate »